View TEL506_4491511.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DC/DC Converters
TEL 5 Series, 5/6 Watt Features Wide 2: Input Range Cost efficient SMD-Design High Power Density High Efficiency up to 86% Regulated Outputs I/O-Isolation '500 VDC Indefinite Short-Circuit Protection
24-pin DIP with Industry Standard Pinout
compliant
RoHS
UL 60950-1
High Reliability, MTBF > Mio. h Internal EMI Filter to comply with
EN 55022, Class A (optional)
Lead free Design, RoHS compliant 3 Year Product Warranty
The TEL 5 Series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and excellent cost /performance ratio. High efficiency allows an operating temperature range of -25C to +71C at full load. This product series provides an economical solution for many cost critical applications in industrial and consumer electronics.
Models
Ordercode TEL 5-20 TEL 5-2 TEL 5-22 TEL 5-222 TEL 5-223 TEL 5-240 TEL 5-24 TEL 5-242 TEL 5-2422 TEL 5-2423 8 - 36 VDC 9 - 8 VDC Input voltage range Output voltage 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 12 VDC 15 VDC Output current max. 1200 mA 1000 mA 500 mA 250 mA 200 mA 1200 mA 1000 mA 500 mA 250 mA 200 mA Efficiency typ. 77 % 81 % 84 % 84 % 84 % 79 % 83 % 86 % 86 % 86 %
http://www.tracopower.com
Page of 3
DC/DC Converters
TEL 5 Series Input Specifications
Input current no load /full load Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection 12 Vin models: 20 mA / 590 mA typ. 24 Vin models: 5 mA / 290 mA typ. 12 Vin models: 8.0 VDC / 8.0 VDC 24 Vin models: 16.0 VDC / 16.0 VDC 12 Vin models: 25 V max. 24 Vin models: 50 V max. 1.0 A max. 1% - Input variation Vin min. to Vin max. 0.3 % max. - Load variation 20 - 100 % single output models 1 % max dual output models balanced load 2 % max. 75 mVpk-pk max. 0.02 % /K >120 % of Iout max., constant current indefinite (automatic recovery) single output models: 6800 F max. dual output models: 1000 F max. (each output) - Operating - Case temperature - Storage - 25 C ... + 71C (no derating) + 90 C - 40 C ... + 125 C 95 % rel H max. > 1 Mio. h @ + 25 C 1'500 VDC 380 pF typ. > 1`000 M Ohm 300 kHz typ. UL 60950-1, IEC 60950-1, EN 60950-1 CSA File No. 226037 http://directories.csa-international.org - Input/Output - Input/Output - Input/Output (500 VDC)
5/6 Watt
Output Specifications
Voltage set accuracy Regulation
Ripple and noise (20 MHz Bandwidth) Temperature coefficient Output current limitation Short circuit protection Capacitive load
General Specifications
Temperature ranges
Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217E ground benign) Isolation voltage (60 sec) Isolation capacity Isolation resistance Switching frequency Safety standards Safety approvals
All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3
DC/DC Converters
TEL 5 Series Physical Specifications
Case material Weight Soldering temperature non conductive plastic (UL 94V-0 rated) 17 g (0.60 oz) max. 265 C / 10 sec.
5/6 Watt
Outline Dimensions mm (inches)
23 Bottom view 23 22
9
1 1 20.3 0.5
(0.8 0.02)
Pin-Out
Pin 2 3 9 2.4 0.5
(0.1 0.02)
Single -Vin (GND) -Vin (GND) No pin No con. +Vout -Vout +Vin (Vcc) +Vin (Vcc)
Dual -Vin (GND) -Vin (GND) Common -Vout +Vout Common +Vin (Vcc) +Vin (Vcc)
15.24 16 14
(0.6)
4 6 22 10.2 0.5
(0.4 0.02)
23
2.54
(0.1)
15.24
(0.6)
5.08
(0.2)
4.5 0.5
(0.18 0.02)
22.86 32 0.5
(0.9)
(0.2)
5.0
(1.25 0.02)
Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02)
Specifications can be changed any time without notice
Rev. 09/06
Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com
Page 3 of 3

▲Up To Search▲

Price & Availability of TEL506

	To Download TEL506 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .